QuickTreX® Network Splitter Kit



Item #: QT-Net-Splitr-Kit
Reg. Price: $47.15
Your Price: $34.75

 



Kit contains:
A pair of splitters, two (2) 3' Category 5 E patch cables, and two (2) 10' Category 5 E patch cables.
    • Splits one 4 pair category 5 (or 5E) cable into two Network connections. Works with * 100Base-T Ethernet, 10Base-T, or any connection that utilizes pins 1, 2, 3 & 6.

    • Sold in pairs. Use one at the hub or switch, and one at the user side. The Kit comes with two patch cables for each end (total of 4 cables, 2 x 3ft, and 2 x 10ft).

    • Internal Printed Circuit board Structure meets EIA/TIA Cat 5E Specifications.

  • Works in both 568A and 568B wired systems.
  • Network Administrators, keep several on hand for last minute additions!


What they do: A pair of Network splitters will enable you to utilize a single Cat 5E cable run (which would ordinarily only handle a single 10/100 Base Ethernet connection) for two 10/100 Base Ethernet connections for two computers to connect onto the network. Please note that this will require an extra Hub/Switch or Router port and two additional patch cables.

What they Don't do: The Network Splitters will not create a new hub or router port. If you have a 4 Port router and need to get a 5th computer working than these splitters are not for you.

Application Notes:
1) Requires a proper full 8 pin wiring connection.
2) * For 100Base-T Ethernet, it is recommended that category 5 enhanced cable be used.
3) Longer runs, or cable runs that are less than perfect, may experience lower performance.

Also available without cables: Network Splitter (Pair).

Discounts: (discounted at checkout
50-99 pieces @ 10% off
100 to 249 pieces @ 15% off
250 pieces and up @ 25% off

Availability:
Usually ships within 24 hours.

Urgent Orders: Read Information

Related Products