24 Port Managed Layer 2+ Network Switch with 4 x 10GIG SFP+ Ports by Signamax


click on thumbnail to zoom






Item #: 065-7880
Your Price: $1,556.80
 
 
 
 

 

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

The Signamax 24-port 10/100/1000 Managed Layer 2+ Switch provides non-blocking performance for 24 10/100/1000BaseT/TX Ports, plus 4 1000Base/10GB SFP+ only ports, for a total of 28 ports. The 4 SFP+ slots use auto-detected SFP modules for fiber optic switch interconnection at extended distances. Both ring and star Gigabit backbone network architectures are possible with full automatic failover.

This switch also supports modern capabilities including SSH and full SNMP management at a surprisingly low cost. The 24-Port switch can communicate with network management systems such as HP OpenView™ via SNMP for enterprise-wide status display, statistical monitoring, and switch control. The enhanced Layer 2+ look-ahead routing features and IP type of service support make these models an excellent foundation for establishing or adding to an Enterprise network.


Key Features:

    • • Dual speed SFP+ ports for 10GbE Ethernet or Gigabit Ethernet fiber connectivity
    • • IEEE 802.3az Energy Efficient Ethernet standard supported
    • • IPv6 and s-Flow support
    • • Easy-Port-Configuration for ease of setup in the IP phone, IP camera, or wireless environments
    • • IEEE 802.1AB Link Layer Discovery Protocol and Media Endpoint Discovery standard supported
    • • Supports RSTP/MSTP/STP for Ethernet Redundancy
    • • IP multicast filtering through IGMP snooping V1, V2 & V3
    • • Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP
    • • IEEE 802.1p QoS with four priority queues
    • • Single IP Management for up to 16 Switches
    • • IEEE 802.3 ad Link Aggregation Control Protocol standard supported
    • • RS-232 Console, Telnet, SNMP v1, v2c & v3, RMON, SSL/SSH, HTTP (web browser), and TFTP Management
    • • Supports command line interface in RS-232 console
    • • Secure Shell /Secure Socket Layer and IEEE 802.1x Port-Based Network Access Control with RADIUS supported
    • • Bandwidth rate control, via port-policer
    • • Per-port programmable MAC address locking
    • • Static secure MAC addresses supported
    • • Port mirroring, both inbound and outbound
    • • Supports Network Time Protocol (NTP)

Specifications:


 (dowload spec sheet click here)

User Manual

    • APPLICABLE STANDARDS

    IEEE 802.3 10BaseT
    IEEE 802.3u 100BaseTX
    IEEE 802.3ab 1000BaseT
    IEEE 802.3z 1000BaseSX/LX
    IEEE 802.3ae 10GbE over fiber
    IEEE 802.1p Priority (Quality of Service [QoS])
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1D Spanning Tree Protocol compatible
    IEEE 802.1Q Tagged VLAN with GVRP
    IEEE 802.3x Flow Control
    IEEE 802.1x Access Control
    IEEE 802.1AB LLDP /LLDP-MED
    IEEE 802.3ad LACP

    • PORTS

    24 – RJ-45 10/100/1000BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports, plus
    4 –1000Base/10 GbE SFP+ only ports
    Multicast/Broadcast/Unknown-Unicast Storm suppression enabled.

    • LED STATUS INDICATORS

    Per Switch: Power
    Per Port: Copper: Status (Link/Activity),10/100/1000M; SFP Port: Status (Link/Activity/SPD), 100/1000M; SFP+ Port: Status (Link/Activity/SPD), 1000M/10GbE

    • PERFORMANCE

    Latency: <4.5 μs (LIFO).
    Throughput, per switch: 95.232 Mpps
    Switch Fabric Speed: 128 Gbps (non-blocking, wire speed performance)
    MAC Address Capacity: 32K
    Jumbo Frame Support: up to 10056 bytes frame size
    Port Mirroring: Inbound and Outbound, assignable to any port

    • NETWORK SECURITY

    Secure Socket Layer / Secure Shell (SSL/SSH)
    IEEE 802.1x access control with RADIUS and TACACS+
    Management Access Policy Control (ACL):
    Supports up to 512 entries. Drop or rate limitation based on:
    • Source and destination MAC, VLAN ID or IP address, protocol, port,
    • Differentiated services code point (DSCP) / IP precedence
    • TCP/ UDP source and destination ports
    • 802.1p priority
    • Ethernet type
    • Internet Control Message Protocol (ICMP) packets
    • TCP flag

    • INTERNETWORKING PROTOCOLS SUPPORTED

    Link Layer Discovery Protocol and Media Endpoint Discovery: IEEE 802.1AB
    Link Aggregation Control Protocol Trunking: IEEE 802.3ad; 26 trunking groups; up to 4 ports for each group.
    GARP VLAN Registration Protocol / Generic Attribute Registration Protocol: IEEE 802.1Q with GVRP/ GARP
    Multicasting: Supports IP Multicast Filtering via IGMP Snooping V1, V2 & V3
    Spanning Tree Protocol / Rapid Spanning Tree /Multiple Spanning Tree Protocol: IEEE 802.1d/1w/1s
    Static Routing: IPv4 and IPv6 Unicast Static Routing

    • VLAN CAPABILITIES

    Port-based VLAN
    IEEE 802.1Q Tag-based VLAN; up to 4,096 active VLANs possible
    Q-in-Q VLAN supported, to efficiently enable Subscriber Aggregation
    Private VLAN Edge; Voice VLAN

    • QoS CAPABILITIES

    Supports Layer 4 TCP/UDP port and ToS classification
    Supports 802.1p QoS with eight hardware queues
    Supports Strict Priority and Weighted Round Robin (WRR)
    Supports priority in a Q-in-Q tag for Bandwidth Control
    Classification:
    •Port based
    •802.1p VLAN priority based
    •IPv4/IPv6 precedence / DSCP based
    •Differentiated Services (DiffServ)
    •Classification and re-marking ACLs
    Supports bandwidth rating per port
    •Ingress policer
    •Egress shaping and rate control

    • MANAGEMENT

    Access Methods: Console port access via RS-232C/RJ-45 local console serial port (cable included with switch), SSH/SSL, Telnet, SNMP, or HTTP.
    Software Upgrade Capability: Via HTTP, TFTP in-band, Console out-of-band
    SNMP v1, v2c, and v3 Network Management
    RFC 1213 MIB (MIB-II)
    RFC 1757 RMON MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    Enterprise MIB
    Other Management:
    • HTTP/HTTPs; SSH
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Ping
    • Syslog
    • Telnet Client
    • IPv6 Management

    • ELECTRICAL CHARACTERISTICS

    AC Input Range: 100 – 240 V AC, 50/60 Hz internal universal power supply

    • ENVIRONMENTAL REQUIREMENT

    Operating Temperature: 32°F to 113°F (0°C to 45°C)
    Storage Temperature: -4°F to 158°F (-20°C to 70°C)
    Operating Humidity: 10 to 90% (non-condensing)
    Altitude: 10,000 feet or less (3,000 meters or less)

    • PHYSICAL CHARACTERISTICS

    Dimensions: 17.4” W x 8.1” D x 1.73” H (442 mm x 211 mm x 44 mm)
    Housing: Metal case. 19 in rack mounting hardware included.
    Weight: 5.3 lb (2.4 kg)

    • CERTIFICATIONS

    CE, FCC, ROHS

    • WARRANTY

    Five years, including power supply



Availability:

Usually ships within 24 hours.

Urgent Orders: Read Information