OpticalCON DUO Chassis Connector | Tactical Connector

OpticalCON DUO Chassis Connector

click on thumbnail to zoom

Item #: QT-NO2-4FDW-A
Your Price: $95.00



Be the first to submit a review on this product!
Review and Rate this Item

This chassis connector has black chromium plating, 4 solder contacts, and 1 LC-Duplex feedthrough socket. It is waterproof acc. to IP65 and is a front panel mount. 

It acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection, and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.


  • Compatibly chassis for the opticalCON DUO assemblies
  • Designed as feedthrough with automatic sealing shutter
  • Shutter with silicone gasket protects optical connection from dust and dirt
  • Accommodates standard LC connectors on the rear for simple installation
  • Connection on the front side either by rugged opticalCON or standard LC connector
  • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
  • Water resistant according to IP65 ingress protection in mated condition
  • In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP 52.
  • Color coded rubber sealing to identify fiber mode:
    Multimode - black
    Single mode PC - blue
    Single mode APC - green

New FeatureImproved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.

Advanced Chassis with Ground Contact (optional - drop down): 
  • Additional 1 shell ground contact (for SMPTE cable shield)
  • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage