Fast Lead Times // Quick transit
Easily convert your MTP/MPO trunk assembly to LC simplex adapters with this 12 Fiber Multimode 50/125 OM4 10/40/100 GIG 1 X 12 MTP/MPO Female to 12 LC LGX Adapter Panel Cable Harness. Simply connect the MPO end of this harness to any MTP or MPO male trunk. The adapter panel will fit into any standard LGX chassis found in wall mount and rackmount fiber optic enclosures.
Our line of stock MPO/MTP fiber optic fanout cable assemblies that are used in these harnesses are a great value, high quality, and ship same day. The multimode assembly also includes high quality glass and a riser (ONFR) rated jacket. MPO connectors are interchangeable with MTP® connectors. This fanout assembly features MPO (1 X 12) Female (No Pins) to standard LC simplex connectors and are constructed of 12 strands of 50/125 micron multimode OM4 fiber. They are 100% factory tested and serialized with test results included. Typical insertion loss is <0.30dB and typical return loss is >35dB. These cables include a standard Method A straight through pin out.
MPO/MTP fanout assemblies are designed to take an existing MPO or MTP assembly and transition it standard fiber optic connectors. These fanout assemblies are perfect for patching into an MTP/MPO adapter panel and then fanning out your connectors to your equipment or another adapter panel that will distribute your standard LC connectors.
NOTE: The MPO connector is female (no pins) and requires a male (pinned) MTP or MPO connector to couple to.
At LANshack, we specialize in custom high density pre-terminated MTP® Trunks and Fanouts and also offer a full variety of MTP cassettes and enclosures to perfect your high density custom fiber optic installation. MTP or Multi-fiber Push-On Connectors include 12 or 24 fibers all in one connector. They are perfect for high denisty applicatoins often seen in data centers, campuses, or other similar commercial network settings. We offer pre-terminated MTP trunk assemblies from 12 fibers all the way up to 288 fibers. MTP Assemblies can be transitioned to standard fiber optic connectors with MTP/MPO cassettes or via a MTP adapter/coupler and MTP fanout cable. We also offer any jacket type including: indoor, indoor armored, indoor/outdoor, indoor/outdoor armored, outdoor OSP, outdoor armored OSP. These jackets types are designed to work with all installations whether it be indoor, underground conduit, direct burial, or overhead distribution. Our custom MTP trunk and fanout assemblies always include genuine US Conec connectors and unless otherwise stated Corning glass. They come to you fully tested with test report and offer a true plug-and-play solution for high density installations. Our custom assemblies are made to order in the USA with ISO certified manufacturing.
Configure your MTP Trunk and Fanout Assembly in seconds with our Easy Configurator Builder Tool.
At LANshack we offer a full MTP Solution for your High Density Applications and Installations including MTP Assemblies, Cassettes, and Enclosures. All Our MTP Trunk & Fanout Assemblies include Corning Glass and Genuine US Conec Connectors. We offer them in any jacket type.