Stranded cable is for use in shorter runs between network interface cards (NICs) and and wallplates or between concentrators and patch panels, hubs, and other rack mounted equipment. Stranded-conductor cable is much more flexible than solid-core cable. However, attenuation is higher in stranded-conductor cable, so the total length of stranded cable in your system should be kept to a minimum to reduce signal degradation.
This cable is made with 100% bare copper wire and is fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in Cat5e and Cat6 cables. It is made with a PVC sheath, and has an thickness of 0.51mm. CAT 6 compliant Cable and accessories from ABA provide much more than sufficient headroom for the most robust network applications.
Do you need Ethernet patch cables in which reliability and performance is a must? Don't let your Ethernet patch cables be the weak link in your critcal network. At LANshack, we manufacture premium custom Ethernet patch cables. Our patch cables are always custom made to order in the USA with premium components. We offer every cable type including: Cat 5E, Cat 6E, Cat 6A, and Cat 8. We also offer shielded and non-shielded options. Since these cables are custom made to order, we can make them in any length from 6 inches to 250 feet. We can also make them in 9 different colors and can make them booted or non-booted. We offer the following jacket types: standard indoor in riser rated and plenum rated jackets, outdoor direct burial rated patch cables, and tactical deployable.