888-568-1230Fast Lead Times | Fast Shipping
Quickly and easily convert and extend your local area network with a RJ45 Ethernet handoff to fiber and then back to a RJ45 Ethernet connection.
Quickly and easily extend your 10 Gigabit local area network with our QuickTreX® 10 Gigabit Fiber Optic Network Extension Kit. This network extension kit has everything you need to extend your local area network or internet connection to a distant location that is too far for Ethernet cabling. This kit includes a 2 Strand Singlemode Indoor/Outdoor Plenum Rated Pre-Terminated Fiber Optic Assembly with pulling eye on lead end of assembly, (2) 10 GIG Media Converters, and (2) Singlemode 10 GIG SFP+ modules. This fiber optic assembly will include LC UPC connectors that are designed to go into the SFP modules. Simply run your cable and then plug the fiber optic cables into the SFP modules that are inserted into the media converters. It's that easy. We also offer an option for extra fiber optic assemblies for longer network extensions. The extra assembly/s will come with a duplex coupler so you can couple the assemblies together.
About the Assembly:
This network extension kit includes our one-of-a-kind QuickTreX® Custom Pre-Terminated Fiber Optic Cable Assembly. For this kit we pre-make these assemblies so they are on the shelf and ready to ship. These assemblies are made in the USA and have a longstanding reputation of 25+ years for premium quality and reliability that cannot be beat. We have a strict quality control manufacturing process and are ISO 9001 certified. The assembly included in this kit follows our exact custom manufacturing process and includes premium components including Corning® glass. Your assembly will be made in the USA by highly skilled technicians under strict quality control and comes to you fully tested and ready for immediate installation.
The jacket on the fiber optic assembly included will have a plenum rated indoor/outdoor jacket. Below describes typical indoor/outdoor jacket applications:
Our Indoor/Outdoor Pre-Terminated Fiber Optic Cable Assemblies are perfect for connecting the networks of two buildings through the use of an underground conduit, headend termination to a fiber backbone, termination of fiber rack systems, multi-floor deployment where select fibers are used at each floor, or intra-building backbones. This cable is suitable for indoor and outdoor use, so there is no 50 foot fire code requirement traditionally found with outdoor (OSP) cable. This indoor/outdoor cable has a water blocking aramid yarn strength member surrounding the fiber optic strands and a UV resistant outer jacket making it a very versatile and perfect choice for a large variety of installations. This cable can be installed and left exposed in outdoor locations where blunt force or rodent chew damage is not a concern.
This indoor/outdoor network extension kit will will also include a plenum rated jacket which is perfect for installations that transition from an outdoor location such as an underground conduit, to an interior location that requires a plenum rated jacket such as ventilation shafts. A cable rated for plenum installation will have low-smoke characteristics as defined by the NFPA (National Fire Protection Agency).
Standard QuickTreX® Manufacturing Features:
- Fast Custom ISO 9001 Certified Manufacturing in the USA. 2-millimeter color coded or sequentially labeled furcation tubing is installed on each strand for easy identification and extra durability before, during, and after the pull.
- Heat shrink tubing and glue set is used at the transition from the jacket to the furcation tubing providing superior strength and strain relief while pulling the assembly.
- Connectors inside the basket are staggered for less bulk and more flexibility.
- Each connector is individually plastic wrapped to prevent contamination by pulling lubricants and/or other contaminants.
- Each assembly includes a wrap around-label on both ends of the assembly which will include the QuickTreX® part number and individual serial number.
- Each Assembly includes a full test report. During our testing process all fiber ends are visually inspected with a fiberscope of 400 power or better for surface defects including, cracking, pitting, and scratches, on the glass surface of the connector. All connector ends are then tested utilizing a professional grade Loss Test Set
- The test report is saved in our database for 1 year and can be requested at any time.
- A pulling eye will be included on the lead end of the assembly. It is made from super strong polyethylene mesh and feature a free-spinning buckle to eliminate twisting of the cable during the pull. Heat shrink tubing is used where the basket meets with the turnbuckle (pull eye hook) and where the basket ends and connects with the cable jacket to prevent snags and promote a smooth pull.
About the Cable Jacket:
- Singlemode 9/125 SMF-28 Ultra Fiber Exclusive use of Corning® Optical Fibers
- Wavelength – 1310/1550nm
- Link Length: 10,000 m (1Gb/s@1550nm), 5,000 m (10Gb/s@1550nm)
- Bandwidth (EMB High Performance): 4700MHz.km@850nm
- Yellow Jacket Color
- UV Rated Distribution Jacket
- Plenum (OFNP) Rated – PVC Flame Retardant
- Water Blocking Aramid Yarn Strength Reinforcement Inside Jacket
- 900 µm Tight Buffers
- Jacket print ensures product identification and fiber type
- Heavy duty distribution jacket offers protection during installation and in rugged use applications.
- Temps: Storage -40ºC to +70ºC Operation -40ºC to +70ºC
- Outer Diameter: 4.4mm
- Min Bend Radius Installation: 6.6cm
- Min Bend Radius Operation: 4.4cm
- All components materials meet the EU RoHS and REACH Directive standards
- ISO 9001 Certified Manufacturing in the USA
About the Media Converter:
- Works with both Singlemode and Multimode Fiber
- Accepts standard hot pluggable SFP+
- Transparent Transport and very low delay
- Supports ITUT prescribed DWDM/CWDM wavelength
- Support DMI function for SFP+ fiber module
- Support Loop-back test function
- Powerful Network Management function
- Auto-MDI/MDI-X, auto-negotiation
- Provide reliable long-distance connection
- 1 x 10GBASE-X R SFP+ interface
- LED: Power/100M/1000M/10G/LINK/ACT/Fiber
- Compact size with rugged metal case
- Low Power Consumption
- 1 Year Warranty
About the SFP Modules:
This QuickTreX® small form-factor pluggable (SFP) fiber optic transceiver supports Gigabit Ethernet transmission over singlemode fiber optic cable 2 kilometers at 1310nm. It adheres to the IEEE 802.3z standards for Gigabit Ethernet fiber connectivity, and is cost-effective in providing changeable Gigabit Ethernet fiber optic interfaces to switches and media converters equipped with a standard SFP port.
- Transmission Rate: 10G
- Accepts a Singlemode Duplex LC Connector or 2 Simplex Connectors
- 1310nm VCSEL Laser and PIN Photodetector
- Up to 20 km Transmission @ 1310nm
- +3.3V Single Power Supply
- Low EMI and Excellent ESD Protection
- Laser Safety Standard IEC-60825 Compliant
- Operating Temps: 0 to +70°C
- Silver with Blue Clip
- Compatible with RoHS
- Router / Server interface
- Distributed Multi-processing
- Switch to Switch Interface
Lead time: In Stock (Ships within 24 Business Hours)
NOTE: Due to the nature of this product it is non-cancelable and non-returnable.
For pre and post purchase advice or tech support contact us by phone or email:
By Phone: 888-568-1230 Option 2
By Email: [email protected]
Videos
When you place an order
