Low Stock Available
The Multilink FRM-4RU-12X-TS-S is a 4 RU 12 termination panel 19" or 23" rack mount fiber distribution unit designed to support both patching and splicing in one unit. The unit has a slide out master panel that allows for accessing terminations or for splicing if used as patch/patch splice housing.
The unit also has a swell latch door and a two-piece top to allow for easy access to the adapter panels. The FRM-4RU-12X-TS is one of a family of units that support fiber termination in rack mount applications.
|Capactiy:||The unit can support patching, patching and splicing|
| Terminations: (12) Multilink Termination Panels
(see individual panel capacities),
|Splices: Eight 2000-SSTA (24 single splices per tray)|
|Coatings:||Electro statically applied polyester powder coat|
Availability: Ships in 24-48 hours.
Urgent Orders: Read Information
Configure your Fiber Optic Patch Cables and Enclosures in seconds with our Easy Configurator Builder Tool.
At LANshack, we specialize in custom high density pre-terminated MTP® Trunks and Fanouts and also offer a full variety of MTP cassettes and enclosures to perfect your high density custom fiber optic installation. MTP or Multi-fiber Push-On Connectors include 12 or 24 fibers all in one connector. They are perfect for high denisty applicatoins often seen in data centers, campuses, or other similar commercial network settings. We offer pre-terminated MTP trunk assemblies from 12 fibers all the way up to 288 fibers. MTP Assemblies can be transitioned to standard fiber optic connectors with MTP/MPO cassettes or via a MTP adapter/coupler and MTP fanout cable. We also offer any jacket type including: indoor, indoor armored, indoor/outdoor, indoor/outdoor armored, outdoor OSP, outdoor armored OSP. These jackets types are designed to work with all installations whether it be indoor, underground conduit, direct burial, or overhead distribution. Our custom MTP trunk and fanout assemblies always include genuine US Conec connectors and unless otherwise stated Corning glass. They come to you fully tested with test report and offer a true plug-and-play solution for high density installations. Our custom assemblies are made to order in the USA with ISO certified manufacturing.
Configure your MTP Trunk and Fanout Assembly in seconds with our Easy Configurator Builder Tool.
At LANshack we offer a full MTP Solution for your High Density Applications and Installations including MTP Assemblies, Cassettes, and Enclosures. All Our MTP Trunk & Fanout Assemblies include Corning Glass and Genuine US Conec Connectors. We offer them in any jacket type.