Cat 6 1000x, UTP, PVC, 4 Pair 28 AWG Stranded Cable - 1000 Ft by ABA Elite

Stranded cable is for use in shorter runs between network interface cards (NICs) and and wallplates or between concentrators and patch panels, hubs, and other rack mounted equipment. Stranded-conductor cable is much more flexible than solid-core cable. However, attenuation is higher in stranded-conductor cable, so the total length of stranded cable in your system should be kept to a minimum to reduce signal degradation.

This cable is made with 100% bare copper wire and is fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in Cat5e and Cat6 cables. It is made with a PVC sheath, and has an thickness of 0.51mm. CAT 6 compliant Cable and accessories from ABA provide much more than sufficient headroom for the most robust network applications.

 

Note PVC Cables: PVC jacketed cables are used in non-plenum spaces which account for most residential and some commercial spaces (where not mandated by local building codes). See the info page

 ABA Cat 6 Elite 1000x UTP, 28 AWG 4 Pair Stranded Cable Specs

• Plenum Vs. Riser
• Solid Vs. Stranded
• Category 5 / 5E & Cat 6 Cabling Tutorial and FAQ's