Neutrik OpticalCON DUO Chassis Connector

Price: $95.59

SKUNO2-4FDW-A

Sealing Gasket

Sealing Cover

Estimated Lead Time: Typically Ships Within 24 Business Hours

This Neutrik opticalCON Duo Chassis Connector is designed to accept opticalCON Duo connectors. The backside of this connector is designed to accept a standard LC Duplex conncector or two LC Simplex connectors. This connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It has black chromium plating, 4 solder contacts, and 1 LC-Duplex feedthrough socket. It is waterproof acc. to IP65 when mated with a opticalCON connector on the front side.

It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection, and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.

Features:

Designed to accept opticalCON DUO connectors

Works as a feedthrough coupler with automatic sealing shutter

Shutter with silicone gasket protects optical connection from dust and dirt

Accommodates standard LC connectors on the rear for simple installation

Water resistant according to IP65 ingress protection in mated condition

Options:

SCDP: This sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors for front panels.
SCDX: This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42.
SCCD: The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time.
SCD-NC: Rugged rubber sealing cover for opticalCON chassis connectors. Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.
SCNO-FDW-A: Rugged, all metal sealing cover for opticalCON chassis connectors. Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.

Technical Information

Product

Title: NO2-4FDW-A

Gender: female

Electrical

Contact resistance: < 7 mΩ

Dielectric strength: 1,5 kVdc

Insulation resistance: > 2 GΩ (initial)

Rated current per contact: 6 A

Rated voltage: < 50 V (1)

Mechanical

Insertion force: < 45 N

Withdrawal force: < 45 N

Lifetime: > 5000 mating cycles

Locking force: 1000 N

Locking device: Push-Pull

Mounting direction: Front mounting

Chassis shape: D

Material

Contacts: Bronze (CuSn6)

Insert: Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)

Shell: Zinc diecast (ZnAl4Cu1)

Shell plating: Black chromium

Split sleeve: ceramics

Environmental

Flammability: UL 94 V-0

Temperature range: -40 °C to +75 °C

Optical

Optical connector: LC-Duplex Feedthrough

New Feature: Improved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.

Availability:

Usually ships within 24 hours.

Show More +

Resources Specific To This Product

Fiber Type Versus Speed and Distance

Extend Your Network to a Distant Location with Our Pre-Terminated Fiber Optic Cable Assemblies

Do you need to extend your internet network to a distance that is too far for standard ethernet cabling? We make IT easy with our custom pre-terminated fiber optic cable assemblies. With our pre-terminated assemblies you can extend your network to any distant location. Whether it be to another location within a large building, between two buildings, or to another structure on your property. We offer any jacket type to fit your installation. Whether it be indoor ,installations, underground Installations, and aerial installations.

LANshack Pre-Terminated Fiber Optic Assemblies

In this video we we explain the different types of pre-terminated fiber optic assemblies we manufacture and go over our premium features included on all of our fiber optic assemblies.

LANshack Easy Configurator Builder Tools

Configure your Pre-Terminated Fiber Optic Assembly in seconds with our Easy Configurator Builder Tool.

OpticalCON DUO Pre-Terminated Assemblies & Accessories