The Dual OWL is a cost effective, compact, handheld light source. The temperature compensated outputs are calibrated to couple -20dBm of optical power into multimode fiber. The light source comes installed with the two most commonly used multimode wavelengths - 850nm and 1300nm. The source has an intuitive two-button interface - one button for turning the unit ON or OFF and the other for wavelength selection. LED indicators highlight the selected source and verify that battery power is sufficient to maintain the calibrated output power.
Dual OWL series fiber optic light sources offer exceptional value at an economical price. These LED-based sources provide the fiber optic installer with a stable output when testing multimode fiber optic runs. The Dual OWL combines an 850nm and a 1300nm LED into one light source to provide the widest range of options for multimode optical fiber testing.
High intensity LEDs such as the ones in Dual OWL light sources produce intense beams of infrared energy that are invisible to the eye.
Features
- Stable temperature compensated LED sources
- Contains both commonly used multimode wavelengths: 850 and 1300nm
- Available with either ST or SC fiber connectors (replace 'xx' at end of part number with ST or SC to specify connector type)
- Extended battery life - up to 30 hours on one 9v battery
- Combination selected source / Low battery indicator LEDs
- Simple two-button operation
- NIST traceable
- Very economically priced
Key Specifications
- Output Power -20 dBm into multimode
- Initial Accuracy +/- .10dB @ 25 C
- NIST traceable calibrated wavelength 850nm, 1300nm
- Center Wavelength 850nm +/-30 nm 1300nm +/- 50nm
- Spectral Width 60nm @ 850nm 180nm @ 1300nm
- Typical 1 hour drift (dB) [email protected] [email protected]
- Dimensions 4.94 x 2.75 x 1.28 in
Specifications and More Information
Availability: Usually ships within 24 hours.
Urgent Orders: Read Information
You can be the first one to write a review.
