Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP.
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.
Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features:
- LC front compatibility
- Shutter with silicone gasket protects optical connection from dust and dirt
- Accommodates standard LC connectors on the rear for simple installation
- The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
- Designed as feedthrough with automatic sealing shutter
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Connection on the front side either by rugged opticalCON or standard LC connector
- IP65 ingress protection in mated condition with SCDP
- Improved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.
Options:
- SCDP: This sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors for front panels.
- SCDX: This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42.
- SCCD: The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time.
- SCD-NC: Rugged rubber sealing cover for opticalCON chassis connectors. Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.
- SCNO-FDW-A: Rugged, all metal sealing cover for opticalCON chassis connectors. Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.
Technical Information
Product
Title: NO2-4FDW-A
Gender: female
Electrical
Contact resistance: < 7 mΩ
Dielectric strength: 1,5 kVdc
Insulation resistance: > 2 GΩ (initial)
Rated current per contact: 6 A
Rated voltage: < 50 V (1)
Ground contact Faston 2.8 x 0.5 (soldering possible)
Mechanical
Insertion force: < 45 N
Withdrawal force: < 45 N
Lifetime: > 5000 mating cycles
Locking force: 1000 N
Locking device: Push-Pull
Mounting direction: Front mounting
Chassis shape: D
Material
Contacts: Bronze (CuSn6)
Insert: Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
Shell: Zinc diecast (ZnAl4Cu1)
Shell plating: Black chromium
Split sleeve: ceramics
Environmental
Flammability: UL 94 V-0
Temperature range: -40 °C to +75 °C
Optical
Optical connector: LC-Duplex Feedthrough
Insertion loss < 0.4 dB / connection
Availability: Usually ships within 24 hours.