Outdoor (OSP) Gel-Filled Pre-Terminated Assembly

Our Outdoor (OSP) Gel-Filled Pre-Terminated Fiber Optic Cable Assemblies are designed for durability and performance in demanding outdoor environments. These assemblies feature a UV- and crush-resistant jacket with water-blocking gel to protect against moisture infiltration, making them ideal for installations exposed to extreme weather conditions.

They can be installed underground in conduit, overhead lashed to a guy wire, or secured to a building or permanent structure. Their rugged design ensures reliability for applications such as headend terminations to a fiber backbone and intra-building backbone connections. For installations in conduit, a minimum 2" diameter conduit is recommended to accommodate the assembly breakout.

Note: Polyethylene (PE) OSP cables are restricted to a maximum indoor run of 50 feet due to fire code regulations.

Outdoor (OSP) Gel Filled Multimode 62.5/125 OM1 Pre-Terminated Fiber Optic Assembly
Outdoor (OSP) Gel Filled Multimode 62.5/125 OM1 Pre-Terminated Fiber Optic Assembly
Icon
Outdoor (OSP) Gel Filled Multimode 50/125 OM2 Pre-Terminated Fiber Optic Assembly
Outdoor (OSP) Gel Filled Multimode 50/125 OM2 Pre-Terminated Fiber Optic Assembly
Icon
Outdoor (OSP) Gel Filled Multimode 50/125 OM3 Pre-Terminated Fiber Optic Assembly
Outdoor (OSP) Gel Filled Multimode 50/125 OM3 Pre-Terminated Fiber Optic Assembly
Icon
Outdoor (OSP) Gel Filled Multimode 50/125 OM4 Pre-Terminated Fiber Optic Assembly
Icon
Outdoor (OSP) Gel Filled Singlemode Pre-Terminated Fiber Optic Assembly
Outdoor (OSP) Gel Filled Singlemode Pre-Terminated Fiber Optic Assembly
Icon

Overview of Outdoor (OSP) Gel-Filled Pre-Terminated Fiber Optic Assemblies

Outdoor (OSP) Gel-Filled Pre-Terminated Fiber Optic Assemblies are designed for reliable performance in demanding outdoor environments. Featuring a UV- and crush-resistant jacket with water-blocking gel, these cables provide superior protection against moisture, temperature fluctuations, and physical stress.

They are suitable for installation in underground conduit, lashed to a guy wire for aerial applications, or secured to a permanent outdoor structure. These cables are commonly used in headend termination to fiber backbones and intra-building backbones. For conduit installations, a minimum 2" diameter conduit is recommended to accommodate the assembly breakout.

Note: Polyethylene (PE) OSP cables are restricted to a maximum 50-foot indoor run due to fire code regulations.

Overview of Outdoor (OSP) Gel-Filled Multimode 62.5/125 OM1 Pre-Terminated Fiber Optic Assembly

This OM1 multimode fiber assembly features a 62.5/125-micron core, making it an excellent choice for legacy networking environments and industrial applications that require reliable data transmission over short to medium distances.

Overview of Outdoor (OSP) Gel-Filled Multimode 50/125 OM2 Pre-Terminated Fiber Optic Assembly

The OM2 multimode assembly offers improved bandwidth compared to OM1, supporting higher-speed transmissions over moderate distances. It is ideal for industrial networking and local outdoor fiber connections.

Overview of Outdoor (OSP) Gel-Filled Multimode 50/125 OM3 Pre-Terminated Fiber Optic Assembly

Designed for higher performance, the OM3 fiber optic assembly enables 10Gb Ethernet connectivity over extended distances. Its 50/125-micron core allows for greater efficiency in high-speed networking applications.

Overview of Outdoor (OSP) Gel-Filled Multimode 50/125 OM4 Pre-Terminated Fiber Optic Assembly

OM4 multimode fiber provides enhanced bandwidth and supports longer transmission distances for high-speed applications such as 40Gb and 100Gb Ethernet. It is ideal for environments that require robust outdoor fiber connectivity with minimal signal loss.

Overview of Outdoor (OSP) Gel-Filled Singlemode Pre-Terminated Fiber Optic Assembly

For long-haul and high-bandwidth applications, the singlemode version of this assembly ensures minimal attenuation and maximum efficiency. It is commonly used in telecommunications, enterprise networking, and data center connections.

Industries That Might Need Outdoor (OSP) Gel-Filled Pre-Terminated Fiber Optic Assemblies

  • Telecommunications – Backbone fiber deployments for service providers

  • Municipal & Smart City Infrastructure – Outdoor fiber installations for traffic control and surveillance systems

  • Wireless & Cellular Networks – Fiber-to-the-Antenna (FTTA) and tower backhaul connections

  • Utilities & Energy – Fiber networks for power stations, substations, and industrial facilities

  • Commercial & Industrial Sites – Secure, high-speed outdoor fiber networking for large facilities

Common Uses for Outdoor (OSP) Gel-Filled Pre-Terminated Fiber Optic Assemblies

  • Underground fiber installations inside conduit

  • Aerial fiber deployments lashed to a guy wire

  • Securing fiber optic cables to permanent outdoor structures

  • Moisture-prone environments where water-blocking gel provides extra protection

  • Outdoor-to-indoor transitions (within the 50-foot indoor limit per fire code)

Frequently Asked Questions

Can this cable be used for direct burial?

This cable is designed for underground conduit installation. If direct burial is needed, we recommend using an armored cable for added protection.

Is this fiber suitable for aerial installations?

Yes, it can be lashed to a guy wire for aerial deployments.

What is the recommended conduit size for installation?

A 2" diameter conduit is recommended to accommodate the assembly breakout.

How long can this cable be used indoors?

Due to fire code restrictions, Polyethylene (PE) OSP cables are limited to a maximum indoor run of 50 feet.

Follow us on Social Media for top networking tips!

Image
Image
Image