Neutrik etherCON RJ45 Panel Mount D-Sized Latch Locking Feed-through Coupler - Nickel

RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included

The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.

The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.

NOTE: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

• Accommodates NE8MC* or any standard RJ45 plug
• Mountable from the front or rear of the panel
• Approved latch lock system
• Complies with Cat 5e according to TIA / EIA 568B and ISO / IEC 11801 standard
• Water resistant according to IP65 ingress protection in mated condition

Options:

1. SCDP: This sealing gasket provides a dust and water resistant assembly for all D-shape chassis connectors for front panels.
2. SCDX: This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42.
3. SCCD: The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time.

Technical Information

Product

Title: NE8FDP

Gender: female

Electrical

Contact resistance: < 10 mΩ

Dielectric strength: 1 kVdc

Frequency range: 1 - 100 MHz

Insulation resistance: > 0.5 GΩ

Rated current per contact: 1,5 A

Rated voltage: < 50 V

Transmission performance: CAT 5e

Standard compliance: TIA/EIA 586B, IEC11801

Mechanical

Insertion force: ≤ 20 N

Withdrawal force: ≤ 20 N

Lifetime: > 1000 mating cycles

Panel thickness: max. 4 mm 0.16'

Wiring: Feedthrough

Locking device: Latch lock

Chassis shape: D

Material

Contact plating: 0.2 µm Au over Ni plating

Contacts: Bronze (CuSn8)

Insert: PBTP 15 % GR

Shell: Zinc diecast (ZnAl4Cu1)

Shell plating: Nickel

Environmental

Flammability: UL 94 V-0

Temperature range: -30 °C to +80 °C