Core Alignment Automatic Intelligent Fiber Optic Fusion Splicer Kit with Case, Cleaver, Optical Fiber and Jacket Stripper - E-Series

This Core Alignment Automatic Intelligent Fusion Splicer Kit comes with everything you need for your fiber optic fusion splicing.  This splicer has it all, from the easy-to-use touch screen interface to the rock solid core alignment splicing — all at a price that is thousands less than other comparable brands.

Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is a fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice and with the splice itself being as strong as the original optical fiber.

Process:

The process of fusion splicing normally involves heat to melt or fuse the ends of two optical fibers together. The splicing process begins by preparing each fiber end for fusion.

1. Stripping The Fiber:  Stripping is the act of removing the protective polymer coating around optical fiber in preparation for fusion splicing.

2.  Cleaning The Fiber: The customary means to clean bare fibers is with alcohol and wipes.

3. Cleaving The Fiber: The fiber is then cleaved using the score-and-break method so that its end-face is perfectly flat and perpendicular to the axis of the fiber. 

4. Splicing the fibers: Current fusion splicers are either core or cladding alignment. Using one of these methods the two cleaved fibers are automatically aligned by the fusion splicer in the x,y plane, then are fused together.

SPECIFICATIONS: 

Product Model: LS-EFS-100

Compatible Fiber: SM, MM, DS, NZDS, BI

Product Mode: LS-EFS-100

Compatible Fiber: SM, MM, DS, NZDS, BI

Caldding Diameter: 80~150um

Coating Diameter: 100~1000um

Typical Splice Loss: SM: 0.02dB; MM: 0.01dB; DS: 0.04dB; NZDS0.04dB;BI: 0.02dB

Return loss: Better than 60dB

Cutting length: 8~16mm

Operating Mode: Manual & Automatic

Heating: Automatic Heating

Typical Welding Time: 7 seconds

Heating time: 15s

Optical Fiber Amplification & Display: X, Y single fiber display amplification 300 times, X, Y fiber simultaneous double display amplification 100 times

Welding Result Record: 3000 sets of welding records can be stored

Splice loss: Automatic Evaluation

Pull Test: 1.8~2.2N

Operation Interface: GUI graphical menu interface, easy to operate

Electrode Life: more than 5,000 times can be welded, the user can easily replace the electrode

Operating Environment: Altitude: 0~5000m; Relative humidity: 0~95% Temperature: -20°C~+50°C; Wind speed: 15m/s

Volume/weight: 130mm (L) × 154mm (W) × 132mm (H) / 1.95Kg (including battery)

This Kit Includes:

• Fusion Splicer 
• Fiber Optic Cleaver
• Fiber Optic Jacket Stripper
• Optical Glass Stripper
• Two Size Carrying Straps
• Hard Case 
• Software 

Availability: Usually ships within 24 hours.

Urgent Orders: Read Information