Our one-of-a-kind QuickTreX® Custom Pre-Terminated Fiber Optic Cable Assemblies are made in the USA and have a longstanding reputation of 25+ years for premium quality and reliability that cannot be beat. We have a strict quality control manufacturing process and are ISO 9001 certified. We also offer the easiest ordering process, fastest production times and transit times.
We will keep you informed of your order status from start to finish so you can plan your installation accordingly. You will receive an order confirmation immediately, a ship date within 24 hours, and tracking information once your custom assembly ships out.
When we receive your custom order, we build the assembly to your exact specifications using premium components. Your assembly will be made in the USA by highly skilled technicians under strict quality control and comes to you fully tested and ready for immediate installation. We can guarantee your fiber assembly will arrive quickly and exceed your expectations. Our experts can also help you choose the right assembly for your application.
Our Custom Indoor Plenum Rated OM5 (50/125) - 10/40/100/400 GIG- Multimode Pre-Terminated Fiber Optic Assemblies offer the latest state-of-the-art fiber optic technology. It's rated for up to 400GIG and since it includes the same 50/125 Micron core it's downward compatible with 10G, 40G, and 100G networks. At the rate at which the latest technologies are advancing you can be certain our OM5 assemblies are your best bet at future-proofing your network infrastructure. OM5 cable also supports wave division multiplexing with allows for different light wavelengths to be sent through the same strand. As components advance your OM5 infrastructure will allow you to benefit from this technology and expand your network using your existing strands that are in place.
Typical Indoor/Outdoor Jacket Applications:
Our Indoor/Outdoor Pre-Terminated Fiber Optic Cable Assemblies are perfect for connecting the networks of two buildings through the use of an underground conduit, headend termination to a fiber backbone, termination of fiber rack systems, multi-floor deployment where select fibers are used at each floor, or intra-building backbones. This cable is suitable for indoor and outdoor use, so there is no 50 foot fire code requirement traditionally found with outdoor (OSP) cable. This indoor/outdoor utilizes a DryGel water blocking system in the cable core and has a UV and fungus resistant outer jacket making it a very versatile and perfect choice for a large variety of installations. This cable can be installed and left exposed in outdoor locations where blunt force or rodent chew damage is not a concern.
Our indoor/outdoor assemblies include a plenum rated jacket which is perfect for installations that transition from an outdoor location such as an underground conduit, to an interior location that requires a plenum rated jacket such as ventilation shafts. A cable rated for plenum installation will have low-smoke characteristics as defined by the NFPA (National Fire Protection Agency).
Standard QuickTreX® Manufacturing Features:
Fast Custom ISO 9001 Certified Manufacturing in the USA. 2-millimeter color coded or sequentially labeled furcation tubing is installed on each strand for easy identification and extra durability before, during, and after the pull.
Heat shrink tubing and glue set is used at the transition from the jacket to the furcation tubing providing superior strength and strain relief while pulling the assembly.
Connectors inside the basket are staggered for less bulk and more flexibility.
Each connector is individually plastic wrapped to prevent contamination by pulling lubricants and/or other contaminants.
Each assembly includes a wrap around-label on both ends of the assembly which will include the QuickTreX® part number and individual serial number.
Each Assembly includes a full test report. During our testing process all fiber ends are visually inspected with a fiberscope of 400 power or better for surface defects including, cracking, pitting, and scratches, on the glass surface of the connector. All connector ends are then tested utilizing a professional grade Loss Test Set.
The test report is saved in our database for 1 year and can be requested at any time.
Pulling Eyes (pulling baskets) if equipped are made from super strong polyethylene mesh and feature a free-spinning buckle to eliminate twisting of the cable during the pull. Heat shrink tubing is used at:
Where the basket meets with the turnbuckle (pull eye hook).
Where the basket ends and connects with the cable jacket to prevent snags and promote a smooth pull.
All assemblies 100ft and over will be placed on a spool for easy installation. Assemblies under 100ft will be neatly air spooled.