888-568-1230Fast Lead Times | Fast Shipping
QuickTreX Indoor/Outdoor Pre-Terminated Fiber Optic Assemblies are perfect for connecting the networks of two buildings through the use of an underground conduit. This fiber is suitable for Indoor and Outdoor use, so there is no 50 foot fire code requirement traditionally found with Outdoor cable. The Indoor/Outdoor cable has a water blocking aramid yarn strength member surrounding the fiber optic strands to protect from situations where light water infiltration may exist like in an under ground conduit or also in an Indoor situation where the assembly may be exposed to a damp or moist environment.
QuickTreX® brand, custom Pre-Terminated Fiber Optic Assemblies have a longstanding reputation for quality and reliability. When we receive your custom order, we build the assembly to your specifications using the finest materials to our exacting standards. The assembly is made in the USA by skilled technicians under controlled conditions and comes to you fully tested and ready for immediate installation.
Standard QuickTreX Micro-Distribution Features:
- All Pre-Terminated Micro-Distribution Assemblies will be custom made at the time of your order, built with Corning® fiber and premium components to your specifications.
- All micro-distribution assemblies will be constructed using 12 strand grouped breakouts. Each strand will be reinforced with 2mm furcation tubing which helps ruggedize each strand and help protect it during installation. Each strand will include a sequential numerical label. Each 12 strand breakout kit will also be sequentially labeled to help identify each strand on opposite ends of your assembly.
- The buffer tubes will be securely fastened to each 12 strand breakout kit using high strength adhesive type heat shrink tubing.
- The first main breakout will be 12 inches from the main jacket and each group of 12 strands will include a 36" breakout. The main 12 inch breakouts kits will include a 6" stagger.
- The connectors itself will also be staggered to minimize the size of the pulling basket which will be approximately 1".
- Heat shrink tubing will be used at:
- The transition from the buffer tubes to the cable jacket.
- The transition of each 12 strand inner cable to the breakout kit.
- Where the basket meets with the turn buckle (pull eye hook).
- Where the basket ends and connects with the cables jacket.
- One wrap around label will be attached to each end of the cable assembly for identification. The label text includes the cable part number and a unique serialized number.
- Pulling Eyes (pulling baskets), if equipped are made from super strong polyethylene mesh and feature a free-spinning buckle to eliminate twisting of the cable during the pull.
QuickTreX Build Specs
Micro-Distribution Features:
- Perfect for High Density Infrastructures
- Saves Space in Data Racks, Cabinets, and Closets
- Constructed of the highest quality materials
- Made to exacting industry standards
- Tested to meet or exceed EIA/TIA 568/ GR-409-CORE
- All aramid tensile strength members within sub-units
- Smaller cable diameter & more flexibility
Cable Manufacturer Specs
Applications Include:
Headend Termination to a fiber "backbone"
Termination of fiber rack systems
Multi-floor deployment where select fibers are used at each floor
Intra-building "backbones"
MTP/MPO or MTP to breakout terminations
INDOOR / OUTDOOR INSTALLATION INFORMATION
Best Suited for: Indoor/Outdoor cables are approved for use in underground conduits, even if the possibility of water infiltration exists due to it's water blocking aramid strenght members. It can also be used for standard Outdoor applications since it is UV resistant, but it is not rated for direct burial (see Outdoor Fiber). 
The advantage of using Indoor/Outdoor over standard Outdoor cable is that it does not have the 50 foot restriction for indoor installation that standard outdoor cable has. This cable has an overall PVC sheath and is not rated for plenum spaces. It has a durable jacket that adds extra protection during installation and in rugged applications.
* Plenum rated Indoor/Outdoor jacket can be used upon request.
Lead time: Varies usually between 2 to 3 days. Call or email Sales at 888-568-1230 option 1 for a current estimated time.
NOTE: Due to the fact that this is a custom made cable assembly, it is non-cancelable and non-returnable. Please choose your product description and specifications carefully.
For pre and post purchase advice or tech support contact us by phone or email:
By Phone 888-568-1230 Option 2
By Email: [email protected]
RELATED ARTICLES:
- Preparing for & Installing Pre-Terminated Fiber Optic Cable Assemblies
- Suggested Reading: Fiber Type vs Speed and Distance
- Information on 62.5/125 vs 50/125
