Custom Pre-Terminated Outdoor Loose Tube (OSP) MTP® OM3 50/125 48 Fiber (4 x 12) Trunk Assembly - Made in USA by QuickTreX® with Genuine US Conec® Connectors

click on thumbnail to zoom

Item #: QT-MTP-OCS-48M3
Base Price: $548.00
NOTE: Choose options below to calculate price
Please make your selections above.



Be the first to submit a review on this product!
Review and Rate this Item

QuickTreX® MTP® premium cable assemblies are made with the highest quality cable and components.  This assembly will start with genuine MTP® connectors from US Conec and we will then precision terminate them to CommScope® outdoor (OSP) optic fiber. Our MTP® termination process delivers uniform height and positioning for maximum physical contact for consistently low insertion loss and excellent return loss characteristics across the entire 12 fiber interface. Made with plenum rated round mini-distribution cable for flexibility in all directions. Proudly made in the USA. RoHS compliant.  Our assemblies come to you fully tested to the highest standards and the test results are included with your assembly.  

Our outdoor assemblies are rated for almost all outdoor applications. This cable is suitable for underground installation inside conduit and pathways that are subjected to wide temperature variations or water infiltration, overhead lashed to a guide wire, or secured to a building or other permanent outdoor structure.  The heavy duty polyethylene jacket is also UV rated so it can be exposed outdoors where there is no threat of rodent damage or blunt force damage. 

This 48 Fiber cable assembly will have one four 12 Fiber MTP® Connectors on each.  

MTP Polarity  


Method A
has a key up key down position, and the fiber remains the same straight through the cable. Therefore each fiber is in the same position on each end of the cable. Fiber 1 in the cassette mates to Fiber 1 in the cable assembly, which mates to Fiber 1 in the end cassette. The transmit/receive flip must happen with the patch cords either at the beginning or end of the link to ensure proper transceiver polarity.



Method B utilizes a key up to key up position and this fiber cable is fully flipped on either end. This type of mating creates an inversion, where Fiber 1 is mated with Fiber 12, and Fiber 2 is mated with Fiber 11, etc. For these cables to preform properly, one of the cassettes would need to be inverted internally. This method requires two different cassettes with special labeling to identify which one is flipped. This circuit is completed with using straight patch cords at the beginning and end of the link.*Note- method B is not compatible with our standard QuickTrex cassettes


Method C is very similar to  Method A, with the main difference being the flipping of the patch cords in the link. This method uses key up key down, and the polarity flip takes place within the cable itself. Each adjacent pairs of fiber at one end are flipped at the other end. So Fiber 1 and Fiber 2 becomes Fiber 2 and Fiber 1 at the other end, and so on. This circuit is completed by using straight patch cords at the beginning and end of the link.  

Urgent Orders:  Read Information

NOTE: MTP® is a Registered Trademark of US Conec Ltd. Clearcurve® is a Registered Trademark of Corning Corp.