Cat 5E 350 Shielded (STP), PVC (CM) Stranded Cond. Cable (24 AWG) - 1000 Ft by ABA Elite

Category 5E cable from ABA Cable which exceed the standards of ANSI/EIA/TIA 568A/B, are used on vertical cables, horizontal cables, backbone cables, patch cords, and connecting work areas. In addition to the highest standard of quality of the cable itself, the "Reelex" packaging makes it superior for added convenience and consistency.

• F/UTP, 24AWG stranded bare copper, CAT.5E, CM
• Overall metal foil screen with drain wire
• Sweep frequency up to 350 MHz.
• Overall metal shielded providing good protection from EMI noise
• Structure cabling for horizontal and building backbone cable
• IEEE 802.3u 100BASE-T and legacy speeds.
• IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)

 
350 MHz - Four twisted pairs of 24 AWG stranded copper conductors. 

Note PVC Cables: PVC jacketed cables are used in non-plenum spaces which account for most residential and some commercial spaces (where not mandated by local building codes). See the info page  Plenum Vs. Riser for more details.

 Stranded Cabling Information:  Stranded cable is for use in shorter runs between network interface cards (NICs) and and wallplates or between concentrators and patch panels, hubs, and other rack mounted equipment. Stranded-conductor cable is much more flexible than solid-core cable. However, attenuation is higher in stranded-conductor cable, so the total length of stranded cable in your system should be kept to a minimum to reduce signal degradation.  

 Cat 5E 350 Shielded (STP), PVC (CM) Stranded Cond. Cable (24 Gauge) - Specs

Associated Articles:

* Plenum Vs. Riser

* Solid Vs. Stranded

* Category 5 / 5E & Cat 6 Cabling Tutorial and FAQ's

Availability: Usually ships within 24 hours. 

 

Do you also need:

QuickTreX® Cat 5E Keystone Jack QT-110KST-5B-G

QuickTreX® Professional "Wire Surgeon®" Impact Termination Tool    QT-TPX5000

QuickTreX® 24 Port Cat 5E Patch Panel   QT-110PL248-5B

QuickTreX® 48 Port Cat 5E Patch Panel QT-110PL488-5B