10/100/1000 TX to 100/1000M SFP Rugged Industrial Media Converter by Unicom

This 10/100/1000 TX to 100/1000M SFP Rugged Industrial Media Converter by Unicom is designed for extreme temperature and humid locations.  It's designed to fit into outdoor CAM enclosures.  

SPECIFICATIONS

IEEE Standard: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3z 1000Base-X Gigabit Ethernet

Switch Architecture: Back-plane (Switching Fabric): 4Gbps

Data Processing: Store and Forward

Flow Control: IEEE 802.3x Flow Control and Back Pressure

Jumbo Frame: 16KB

Network Connector: 1 x RJ-45 10/100/1000 Base-T(X) Auto MDI/MDI-X function, Full/Half duplex 1 x 100/1000 BaseF(X) SFP

Network Cable: UTP/STP above Cat.5e Cable, EIA/TIA-568 10-ohm (100m)

Protocol: CSMA/CD

LED: PWR (Green): ON－Power is detected, OFF－Power is not detected, TX LNK/ACT (Green): ON－TX port is detected, Flashing－TX data is transmitting/receiving, SFP LNK/ACT (Green): ON－FX port is detected, Flashing－FX data is transmitting/receiving

DIP Switch: DIP1: OFF－LFP disabled (Default), ON－LFP enabled, DIP 2: OFF－SFP speed 1000M (Default), ON－SFP speed 100M, Link Fault Pass Through (LFP) is when copper side signal lost or disconnect, fiber side link signal will actively off, when fiber side signal lost or disconnect, copper side link signal will also actively off.

Reverse Polarity Protection: Present

Overload Current Protection: Present

Power Supply: 4 pin terminal block with 12V-56V VDC Power Input, Relay: Relay switch for alarm

Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A@24VDC,

Power Consumption: 2 W@48 VDC Without PoE

Removable Terminal Block: Provide 4 pin terminal block, Wire range: 0.34mm^2 to 2.5mm^2, Solid wire (AWG):12-24/14-22, Stranded wire (AWG): 12-24/14-22, Wire Strip length: 7-8mm

Operating Temperature: -40℃ to 75℃

Operating Humidity: 5% to 95% (Non-condensing)

Storage Temperature: -40℃ to 85℃

MTBF (mean time between failure): >500,000 hrs (Telcordia (Bellcore), GB) at 50°C

Housing: Rugged Metal, IP30 Protection

Case Dimension (LxWxD) mm: 103.5mmx32mmx81.5mm (LxWxD)

Installation: DIN Rail and Wall Mount options included

Certifications

Safety: LVD (EN62368-1)

EMC: CE, FCC, EN 55032/24

EMI: CISPR 32, FCC Part 15B Class A

EMS: IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV, IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV, IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV

Vibration: EN 60068-2-6

Shock: EN 60068-2-27

Free Fall: EN 60068-2-32, Relay in short circuit mode when power fails. in open circuit mode when power supply is connected

Availability: Usually ships within 24 hours.

Urgent Orders: Read Information